The laminator is found in the Copy Room located behind the Charging Desk, adjacent to the Reference Collection.
It must be turned on about 20 minutes before use to warm it up. Turn the Heat button from Off to On. After 20 minutes, ask the employee at the desk to get the laminator key. Place the key in the keyhole and turn it. Make sure the binder clip is attached to the film coming out of the back of the machine. This ensures that the plastic does not wrap around the rollers. Place the materials to be laminated on the tray. Turn the Drive button to the Run position and push the materials into the film. When all of the materials have passed the cutting row on the back of the machine, turn the Drive button back to Off. Use a pair of scissors to cut the film from the machine. Turn the Drive button back to Run to release a little more film. Turn it back to Off. Replace the binder clip. Turn the key and remove it. Turn the Heat button to Off.
Return the key to the employee at the front desk. Measure the film you used and pay the employee at the front desk 25 cents a foot.